Lantronix 4100, 2100 - page 37

5: Changing the UBox's Settings

UBox User Guide 37

1. On the Edit Server Configuration window, click the USB Device Configuration

tab.

Figure 5-4. Edit Server Configuration – USB Device Configuration Tab

2. Update the following settings as desired:

Server Serial No. (View-only) Corresponds to the UBox’s MAC/Network

address (printed on the bottom of your UBox hardware).

Device Name Name that is programmed into your USB device by its

manufacturer. This name may different from the actual

name and model number of your device. For example, if

you have an HP Deskjet 882 printer, it may appear as HP

Deskjet 880 or HP Printer. Some USB devices do not have

names programmed into them. For unnamed USB devices,

the USB device's programmed Vendor ID (VID) and

Product ID (PID) display.

Location/Serial

Number The serial number of the USB device if it has one. If it does

not have a serial number, the port (1-4) on the UBox to

which the USB device is connected.

Cfg Displays an asterisk if the device was configured using the

USB Device Configuration window.

Status Indicates whether the selected USB device is Attached,

Detached, or has an Invalid Password (the password in

this and the password saved on the Local Settings tab are

different). (See 6: Changing Local Software Settings.)

3. To add or change information about a device, select the device and click the Add

or Edit button (The Edit button is active if you have already added information.)

The Device Configuration window opens.

Contents

Main Trademark Copyright Contacts Revisions Contents Page Figures Page 1: Using This Guide Purpose and Audience Summary of Chapters 2: Introduction Model and Part Numbers USB Speeds and Throughput Supported Devices Compatible USB Devices Connectivity to USB Devices Connectivity to a Network Connectivity to a PC Hub Support Requirements What's Inside the Package 3: Installing the UBox Installing the UBox Hardware Step 1- Connect the UBox to Your Network Step 2 - Connect the UBoxs Power Supply and Read the LEDs UBox 2100 UBox USB SYSTEM USB Installing the UBox Software Page Uninstalling the Lantronix UBox Software 4: Using USB Devices on the Network Overview Using the Connect and Disconnect icons Using the Auto Connect feature for printers Connecting Your USB Device Step 1 - Connect a USB Device to the UBox Page Step 2 Connect a Networked USB Device Step 3 - Disconnect Your USB Device(s) Using Multiple UBoxes and USB Devices Compound Devices One UBox with Multiple Users Multiple UBoxes and USB Devices UBox Groups on Multiple UDP Ports Other Ways to Connect and Disconnect USB Devices Using the UBox System Tray Auto Connecting Printers Page Using Forced Device Disconnect Using Multi-and Single-User Connect Modes Device Status Separating Compound Devices Types of USB Devices Separating Compound Devices 5: Changing the UBox's Settings Overview Viewing UBox Settings 5: Changing the UBox's Settings UBox User Guide 30 3. In the Status column, the following may display: Editing Server Settings: Access Tab Page Editing Server Settings: Network Tab 5: Changing the UBox's Settings UBox User Guide 34 2. Update the following settings as desired: Page Editing Server Settings: USB Device Configuration Tab Page 5: Changing the UBox's Settings UBox User Guide 38 The following information displays at the top: 4. Update the following settings as desired: Applying, Canceling, or Removing Server Settings Restoring Default Settings Updating the UBox's Firmware Page Overriding Server Network Settings 5: Changing the UBox's Settings UBox User Guide 43 Refreshing Data 6: Changing Local Software Settings Updating Personal Communication Settings Page Updating Server Access Settings Viewing or Removing Device Passwords Switching Between Sets of UBoxes 7: Troubleshooting Before You Begin Troubleshooting: Status Lights Page Boot-Up SYSTEM Status Light 1 SYSTEM Status Lights 2 and 3 7: Troubleshooting UBox User Guide 52 USB Status Lights: 1-4 on the UBox 4100 and 1 & 2 on the UBox 2100 Troubleshooting: UDP Ports Troubleshooting: Network Issues Communication Between your PC and the UBox Firewalls Final Step Resetting the UBox Hardware Power-Cycling or Using the Reset Button Rebooting the UBox into Safe Mode Using the Reset Button Troubleshooting: USB Devices Technical Support Page 8: Status Light Behavior 4 3 2 1 1 2 3 NETWORK USB 1 2 8: Status Light Behavior UBox User Guide 61 Stage Status Troubleshooting 8: Status Light Behavior UBox User Guide 62 Light Color Status A: Configuring the Windows XP Firewall Step 1 - Determine Which Version of Windows XP is Installed on Your Computer Step 2 Access Your Firewall Software (Windows XP and XP Service Pack 1 Only) Page Page Page Page Page Page B: Compliance UBox 4100 CE Mark Declaration of Conformity Canada Digital Apparatus EMI Standard VCCI Australia/New Zealand Disclaimer and Supplementary Information Manufacturers Contact C: Compliance UBox 2100 Declaration of Conformity Conforms to the following standards or other normative documents: Disclaimer and Supplementary Information Manufacturers Contact D: Lantronix Software License Agreement Page E: Lantronix Warranty http://www.lantronix.com/support/warranty/index.html