A:Configuring the Windows XP Firewall
Step 2 – Access Your Firewall Software (Windows XP and XP Service Pack 1 Only)
You need to know your UBox's UDP/TCP port numbers and IP address before configuring your firewall. If you already know this information, skip ahead to Step 3a - Add Settings to the Firewall to Allow Communication with the UBox on page 66.
To obtain your UDP and TCP port numbers:
The Lantronix UBox defaults to using UDP port 10010 and TCP/IP port 10010.
If you have not changed these settings, we will use these port numbers when we configure your firewall. If you have changed the UBox's UDP and/or TCP port numbers, use that number instead of 10010.
To obtain your IP address:
To obtain your IP address:
1.Open the Lantronix UBox application.
2.Click the Servers tab and locate your UBox.
3.Select your UBox. Its IP Address displays in the Server Details area.
Figure 8-5. IP Address on Servers Tab
Note: If the Edit Server Configuration Network tab is set to Automatic, DHCP or Zeroconfig, the UBox is obtaining an IP address dynamically.
UBox User Guide | 64 |
