Lantronix 4100, 2100 Editing Server Settings: Access Tab

5: Changing the UBox's Settings

UBox User Guide 31

Temp. Defaults: The UBox hardware is in Temporary

Default Settings Mode. This mode allows you to return

the UBox to its factory settings temporarily for diagnostics.

You can edit your previous settings while you are in this

mode. (See Resetting the UBox Hardware on page 55.)

Login Failed: Your computer could not connect to the

selected UBox because the UBox has a password. Either

your computer does not have a password set in the Server

Access Settings field in the Local Settings tab or you

entered an incorrect password.

Attempting Discovery: The UBox software is attempting

to locate UBox hardware on your network. This message

temporarily displays when you first start your computer or

when you reboot the UBox. If this message does not go

away, see 7: Troubleshooting.

Attempting to Connect: The UBox hardware is sending

broadcast messages to your computer, but your computer

cannot connect to the UBox hardware. If you have

modified your UBox's settings, set the UBox to the

Temporary Default Settings Mode and change your

settings. If this message does not go away, see

7: Troubleshooting.

4. Select a UBox. Detailed information about the UBox displays under Server

Details on the right side of the window.

Editing Server Settings: Access Tab

The Access tab contains settings that pertain to accessing the UBox hardware and how the

UBox shares USB devices at the server level. These changes affect the selected UBox.

To edit the UBox’s Settings on the Access Tab:

1. To edit a specific UBox's setting, select the UBox from the list and click the

Edit Server Config button. The Access tab on the Edit Server Configuration

window opens.

Contents

Main Trademark Copyright Contacts Revisions Contents Page Figures Page 1: Using This Guide Purpose and Audience Summary of Chapters 2: Introduction Model and Part Numbers USB Speeds and Throughput Supported Devices Compatible USB Devices Connectivity to USB Devices Connectivity to a Network Connectivity to a PC Hub Support Requirements What's Inside the Package 3: Installing the UBox Installing the UBox Hardware Step 1- Connect the UBox to Your Network Step 2 - Connect the UBoxs Power Supply and Read the LEDs UBox 2100 UBox USB SYSTEM USB Installing the UBox Software Page Uninstalling the Lantronix UBox Software 4: Using USB Devices on the Network Overview Using the Connect and Disconnect icons Using the Auto Connect feature for printers Connecting Your USB Device Step 1 - Connect a USB Device to the UBox Page Step 2 Connect a Networked USB Device Step 3 - Disconnect Your USB Device(s) Using Multiple UBoxes and USB Devices Compound Devices One UBox with Multiple Users Multiple UBoxes and USB Devices UBox Groups on Multiple UDP Ports Other Ways to Connect and Disconnect USB Devices Using the UBox System Tray Auto Connecting Printers Page Using Forced Device Disconnect Using Multi-and Single-User Connect Modes Device Status Separating Compound Devices Types of USB Devices Separating Compound Devices 5: Changing the UBox's Settings Overview Viewing UBox Settings 5: Changing the UBox's Settings UBox User Guide 30 3. In the Status column, the following may display: Editing Server Settings: Access Tab Page Editing Server Settings: Network Tab 5: Changing the UBox's Settings UBox User Guide 34 2. Update the following settings as desired: Page Editing Server Settings: USB Device Configuration Tab Page 5: Changing the UBox's Settings UBox User Guide 38 The following information displays at the top: 4. Update the following settings as desired: Applying, Canceling, or Removing Server Settings Restoring Default Settings Updating the UBox's Firmware Page Overriding Server Network Settings 5: Changing the UBox's Settings UBox User Guide 43 Refreshing Data 6: Changing Local Software Settings Updating Personal Communication Settings Page Updating Server Access Settings Viewing or Removing Device Passwords Switching Between Sets of UBoxes 7: Troubleshooting Before You Begin Troubleshooting: Status Lights Page Boot-Up SYSTEM Status Light 1 SYSTEM Status Lights 2 and 3 7: Troubleshooting UBox User Guide 52 USB Status Lights: 1-4 on the UBox 4100 and 1 & 2 on the UBox 2100 Troubleshooting: UDP Ports Troubleshooting: Network Issues Communication Between your PC and the UBox Firewalls Final Step Resetting the UBox Hardware Power-Cycling or Using the Reset Button Rebooting the UBox into Safe Mode Using the Reset Button Troubleshooting: USB Devices Technical Support Page 8: Status Light Behavior 4 3 2 1 1 2 3 NETWORK USB 1 2 8: Status Light Behavior UBox User Guide 61 Stage Status Troubleshooting 8: Status Light Behavior UBox User Guide 62 Light Color Status A: Configuring the Windows XP Firewall Step 1 - Determine Which Version of Windows XP is Installed on Your Computer Step 2 Access Your Firewall Software (Windows XP and XP Service Pack 1 Only) Page Page Page Page Page Page B: Compliance UBox 4100 CE Mark Declaration of Conformity Canada Digital Apparatus EMI Standard VCCI Australia/New Zealand Disclaimer and Supplementary Information Manufacturers Contact C: Compliance UBox 2100 Declaration of Conformity Conforms to the following standards or other normative documents: Disclaimer and Supplementary Information Manufacturers Contact D: Lantronix Software License Agreement Page E: Lantronix Warranty http://www.lantronix.com/support/warranty/index.html