EU Conformity declaration, Product name | Leica DM IRB specs

EU Conformity declaration

We hereby declare that the product specified below conforms in its design and construction as well as the model we have put on the market to the relevant safety and health regulations laid down by the European Union.

This declaration will cease to be valid if the instrument is modified without our consent.

Product name:	DM IRB
Instrument type:	Light microscope
Instrument no.:	020-525.701 to
	020-525.780
EU directives:	Low voltage:
	73/23/EWG
	Electromagnetic
	compatibility:
	89/336/EWG
Harmonised	EN 50081-1
standards	EN 50082-1
applied:	EN 61010-1

Wetzlar, 18. 4. 1997

Prof. Dr.-Ing. habil. M. Jaksch, Director of Technology

and Development Engineering

128

Image 128

Leica DM IRB manual EU Conformity declaration, Product name

Contents

Leica DM IRB Tel. +49 Leica DM IRB Copyrights Contents Operation Automatic lowering → p Text symbols and their meaningImportant notes on this manual General safety information Mains plug must only be inserted into a grounded outletPage Intended application Microscope and its components Key subassemblies Stand First of all, here is a general overview StandsTube mount Tube Brightness adjustment Mains switchCondenser height adjustment Coarse and fine control Specimen stages and accessories LamphousingsObjective nosepiece and objectives IR/R tube adapter Installation site Ambient conditions Temperature 10 36 C Relative humidity Unpacking Installation Assembly of the transmitted light illumination column AssemblyAssembly tools Assembly of condensers Transmitted light illumination column, back view Condenser 0.30 S70 Position condenser disc, empty Assembly of IC condenser prisms Condenser 0.90 S1 bottom up Assembly of condenser 0.30 S70 Condenser top Assembly of condenser holder Condensers 0.53 S23 and 0.90 S1 Assembly of field diaphragm Assembly of filters and filter holder Prism a for objectives N Plan 5x Retrofitting individual IC prismsExamples of prisms Inserting the polariser Differences between prism D and D1Inserting the analyser Inserting the fluorescence module Fluorescence module Connect the lamp plug to the connecting socket in the stand Mirror housing and illumination telescope Lamphousing 107 L Assembling and exchanging incident light lamps Lamphousing 106 z L Lamphousing 106 z L Power units Type It is extremely important to heed the follow- ing advice Assembly of the tubes and tube adapter IR/R Bino HC BSA 25 Trino HC FSA 25 P and PR + PR = with and without back reflection Tube adapter R/IR HC, 2 Clamp screw Adapter, 6 Photo/TV port Transformer Edge of the mirror housing, 11 Mirror housing Screw the retainer ring back Inserting the eyepiecesInserting graticules Remove the screw covers from the objective threads Inserting the photoeyepiecesScrewing objectives in and out Plate x/y stage Only press the spring at the side Connecting the microscope to the mains Rotary stage and insert frame for coverslips Function and operation E version DM IRB/E Features of the Leica DM IRB/EImportant note Assembly and initial installation Controls Exit option in the display flashes Learn modeInstalling the objective prisms Installing the objectives I T Display IC objective prism Display Phase contrastDisplay Objective magnification To learn further objectives Operating modes Dry/ImmersionImmersion objectives Exiting the Learn mode ParfocalityDry objectives Oil immersion objectives Individual user adjustments Sw i t c he s With the key, → b Installing the fluorescence filter cubeConcluding the installation Motorized objective nosepiece Changing the operating mode Operating modesDRY and Immersion Now appears in the LC display at the bottom right Automatic lowering of the objective nosepiece Brightness adjustment Electronic focus Controls of the electronic focus are Coded IC objective prisms option Latter flashes if the combination is wrong Motorised fluorescence filter cube change option Connecting the control unit Control unit Keys on the control unit Component Name on the unit Lamp Focus Examples for the use of the footswitches Switch position Auto Switch position Light onSwitch position Sensor OFF Person sensor option 86mm S 10 0 xPH3 HH Front controls Operation Basic setting Switching on the halogen lamp Adjustment specimen Focusing the specimen Setting the tubes and eyepieces Operation of L objectives with correction mount Only when one eyepiece is without an adjustable eyelens Trinocular tube HCI 3T22 Side of the tube Operation of the side photo/TV port Operation of the front photo/TV port Operation of objectives Immersion objectivesColour coding of objectives Locking objectivesPage Setting Koehler illumination Fig.Ê 62Ê Ê Possible errors Replace the eyepiece or disengage the Bertrand lens Operation of phase contrast Phase contrast observation Setting phase contrast with condensers 0.53 S23 and 0.90 S1 Operation of transmitted light darkfield Darkfield observation DL polarisation Crossing the polarisers Operation Transmitted light interference contrast TL interference contrast Centration of the condenser prisms Objectives for ICT Choice of prisms Setting ICT contrastSources of error if ICT image quality is unsatisfactory Operation of incident light fluorescence Fluorescence observation Method Centration in the rear focal plane of the objective Alternative centration methodsMethod Centration with a centring aid Centration of 12 V 100 W halogen lamp Lamphousing 106 z L with halogen lamp, Xe and Hg lampsMethod Hg 50 W mercury lamp Hg 100 W and Xe 75 W lamps Halogen lamp Hg 50 lamp Xe 75 lamp Centring the aperture diaphragm Centring the field diaphragm Weak fluorescence, insufficient brightness Glass surfaces dirty Operation of filters Light filters Operation of the slide overlay device Slide overlay deviceSlides with the following line patterns are available Scale 10 mm = 100 divisions Operation of the macro device Fig.Ê 73ÊMacroÊ device on FSA 25 PE tube with tube adapter Field of view Ø 10x/20 eyepiece Total magnification in the eyepiece would therefore be Length measurements Following components are required for length measurementsTransmitted light stage micrometer for cali- bration Calibration With zoom magnification Vario TV adapter MTV = objective magnification x tube factor Monitor diameter Long-term video microscopy Fig.Ê 80ÊLeicaÊ DM IRB, equipped with three TV cameras Operation of LMC Principle of LMC Principle Components ComponentsLMC consists of the following components S40/0.50 LMC condenser Assembly/adjustment AssemblyAdjustment Screw the LMC objectives into the objective nosepiecePage Areas of application Care and maintenance Removal of immersion oil Cleaning objectivesAcids, alkaline solutions Troubleshooting Mechanical errorsElectric errors On/off switch does not respond no illumination Additional fluorescence lamp does not respond 106 846-205.000-00 NameSchutter FST 107 Ê Lamphousing 106 z, opened 108 Replacing the 12 V 100 W halogen lamp in lamphousing 106 z 109 Changing the Hg and Xe lamps on lamphousing 106 z 111 Storage Transport Technical description Performance data of objectivesObjective lettering 0Ê -Ê Or A, B, C Objective type performance class Plan10x/0.22 114 Locking of objectives Colour coding of the objectivesWhite Water Eyepiece field of view Performance data of eyepiecesDecisive value is always the smallest Field performance of objectives Eyepiece graticules Filter performance data Use Grey/neutral density filter N Green filter, GR, panchromaticBG20 CB1.5, CB3 Tube performance data Binocular tube HCI B22Binocular ergotube HCI BV22 Like HCI B22, but with variable viewing angle of 15Ê -Ê Trinocular tube HCI 3T22 Tube adapter R/IR Condenser performance data Condenser 0.30 S70 121 122 Condenser discObject guide Lamphousing performance data Lamphousing 106 zLamphousing 107/2 Stages Plane stage and mountable object guide Type Hg ultra high pressure lamp 50 W A.CXe high pressure lamp 75 W D.C., stabilised C., stabilised/non-stabilised General technical data General technical dataFuses Ambient temperature 10Ê -Ê 36C Relative humidity Overvoltage category Contamination class 125 ULa = lamp voltage Technical data of the power unit General technical dataTechnical specifications Main wearing and spare parts, tools 127 EU Conformity declaration Product namePage Ernst-Leitz-Straße