Leica DM IRB manual Assembling and exchanging incident light lamps, Lamphousing 107 L

Assembling and exchanging incident light lamps

Exchanging the 12 V 100 W halogen lamp:

n. b.:

Disconnect the lamp and lamphousing from the power supply. Pull out the mains plug.

Fig. 32a – c Lamphousing 107 L

1 Mount with halogen lamp, 2 Collector

Lamphousing 107 L

Slacken the fixing screw on the cover and lift off the cover (Fig. 32a and 32b). Move the collector to the front and pull the defect 12 V 100 W lamp out of the base towards the front. Without removing its protective cover, put a new lamp into the base, without tilting, as far as it will go.

n. b.:

Leave the protective cover on the lamp until it is in position.

Avoid making finger marks or wipe off immediately. Close the lamphousing.

2

1

29