Operation

Basic setting

n. b.:

for transmitted light

Switching on the halogen lamp

 

When using acids or other aggressive chemicals, special care should be taken. Avoid direct contact of these substances with optical and mechanical components.

Switch on the 12 V 100 W lamp at the mains switch (55.7).

Adjust the brightness with the dial. The numbers are not absolute parameters, but merely serve for reproducible setting. The white dot on the dial indicates the setting for approx. 3200 °K for photography on artificial light film and for TV microscopy.

Fig. 54Ê –Ê 55

1 Binocular phototube, 2 Eyepiece tube, 3 Eyepieces, 4 Tube mount (tube interface), 5 Tube port for photo/TV connection,

6Beamsplitter switch, 7 Mains switch, 8 Brightness adjustment, 9 Lateral TV port, 10 Coaxial coarse and fine drive,

11Fluorescence module, 12 ICT prism adjustment, 13 Sextuple objective nosepiece, 14 Centring buttons for incident light field diaphragm, 15 Field diaphragm adjustment, 16 Filters, 17 Aperture diaphragm adjustment, 18 Lamphousing mount (or mirrorhousing for two lamphousings), 19 Lamphousing, 20 Stage plate, 21 Analyser, 22 Tube lens module (Bertrand lens and magnification changer), 23 Switch rod for lateral TV port, 24 Transmitted light illumination column, 25 Condenser, 26 Transmitted light lamphousing, 27 Transmitted light field diaphragm, 28 SLR port, 29 Second lamphousing

Fig. 54ÊViewÊ

from right side of microscope

Fig. 55ÊViewÊ

from left side of microscope

3

5

2

1

20

4

28

1626

2417

2518

13

19

29

14

 

22

15

9

23

10

27

6

12

1121

8

7

64

Page 64
Image 64
Leica DM IRB manual Operation Basic setting, Switching on the halogen lamp