Leica DM IRB manual Lamphousing 106 z L

Lamphousing 106 z L

Slacken the fixing screw on the lid (33.10). Pull the cut-out plug slightly out of the socket and flip up lid (33.11; 33.1).

Move the collector to the front and lift the defect lamp out of the base (33.1; 33.2; 33.3). For convenience, the lamp holder can be removed from the lamphousing as well. To do this, slacken the fixing screws on the lamp holder (33.10) and pull out lamp holder (Fig. 34).

Without removing its protective cover, put a new lamp into the base, without tilting, as far as it will go.

n. b.:

It is important to leave the protective cover on the lamp until it is in position.

Avoid making finger marks or wipe off immediately. Close the lamphousing.

Fig. 33 Lamphousing 106 z L

1 Lid, flipped up, 2 Collector, 3 12 V 100 W halogen lamp or gas discharge lamp in holder, 4, 9 Cover fixing screws, 5 Reflector, 6, 7, 8 x-y adjustment screw for reflector, 10 Fixing screws for

lamp mount, 11 Socket for contact plug				Fig. 34 12 V 100 W lamp holder with halogen lamp
5			1
6				2
7
				3
8				4
9
10	11	10

30