TYPICAL EXHAUST PIPE CONNECTIONS AND CONDENSATE TRAP INSTALLATION
2”2” 2”
3”
DO NOT transition from smaller to larger pipe size in horizontal runs of exhaust pipe.
TRAP
TRANSITION |
|
*2“ |
|
Use only the factory−supplied |
|
trap. Trap can be installed on |
|
either side of cabinet within 5 ft. | Exhaust |
| Air Intake |
of the furnace. | TOP VIEW |
|
*When transitioning up in pipe size, use the shortest length of 2” PVC pipe possible. NOTE − Exhaust pipe and intake pipe must be the same diameter.
FIGURE 16
TYPICAL AIR INTAKE PIPE CONNECTIONS
2”
2”
2”
TRAP
TRANSITION | 3” |
| ||
|
| |||
|
| TRANSITION |
| |
*2” | 3” | *2” |
| |
|
| |||
*2” |
|
|
| |
Use only the factory−supplied |
|
| ||
trap. Trap can be installed on |
| Exhaust | ||
either side of cabinet within 5 ft. | Air Intake | |||
TOP VIEW | ||||
of the furnace. |
|
* When transitioning up in pipe size, use the shortest length of 2” PVC pipe possible. NOTE − Intake pipe and exhaust pipe must be the same diameter.
FIGURE 17
Page 16