Table 6. Startup menu items

Menu item

Selection

Comments

 

 

 

 

Boot

 

 

Refer to “Changing the startup

 

 

 

sequence” on page 114.

 

 

 

 

Network Boot

 

 

Refer to “Boot submenu” on page

 

 

 

115.

 

 

 

 

UEFI/Legacy Boot

Both

Select system boot capability.

 

UEFI Only

Both: The system will boot

 

Legacy Only

 

following the UEFI/Legacy Boot

 

 

Priority setting.

 

 

 

 

 

UEFI/Legacy Boot Priority

UEFI Only: The system will boot

 

UEFI First

 

from the UEFI enabled operating

 

 

system.

 

Legacy First

 

 

Legacy Only: The system will boot

 

 

 

 

CSM Support (for UEFI Only)

 

from any operating system other

 

 

than the UEFI enabled one.

 

No

 

 

Note: If you select UEFI Only,

 

Yes

 

the system cannot boot from the

 

 

 

bootable devices that do not have the

 

 

 

UEFI enabled operating system.

 

 

 

Compatibility Support Module (CSM)

 

 

 

is required for booting the legacy

 

 

 

operating system. If you select UEFI

 

 

 

Only, CSM Support is selectable.

 

 

 

For Both or Legacy Only mood, CSM

 

 

 

Support is not selectable.

 

 

 

 

Boot Mode

Quick

Screen during the POST:

 

Diagnostics

Quick: The ThinkPad Logo screen

 

 

 

 

is displayed.

 

 

 

Diagnostics: Test messages are

 

 

 

 

displayed.

 

 

 

Beep at POST completion:

 

 

 

Quick: No. Sounds on error cases

 

 

 

 

only.

 

 

 

Diagnostics: Yes. Always sounds.

 

 

 

“Ctrl-S” prompt for on-board

 

 

 

Ethernet:

 

 

 

Quick: No.

 

 

 

Diagnostics: Yes.

 

 

 

Memory testing during the POST:

 

 

 

Quick: Quick test (or no test).

 

 

 

Diagnostics: Full test.

 

 

 

Testing other devices during the

 

 

 

POST:

 

 

 

Quick: Minimum test (or no test).

 

 

 

 

 

116User Guide

Page 132
Image 132
Lenovo E431 Menu item Selection Comments Boot, Network Boot, UEFI/Legacy Boot Both, Following the UEFI/Legacy Boot, Yes