Lenovo X131E Using a flash media card, Inserting a flash media card, Configuring camera settings

Configuring camera settings

You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.

To configure the camera settings, do the following:

•For Windows 7: Press Fn+F6. The Communications settings window opens. Click the Manage Settings button and configure the camera settings as desired.

•For Windows 8, do one of the following:

–Configure the camera settings directly from the program that is using the camera. For details, see the help information system of the program.

–Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the screen to configure the camera settings as desired.

Using a flash media card

Your computer has one media card reader slot.

The media card reader slot supports the following four types of cards:

•Secure Digital (SD) card

•Secure Digital High-Capacity (SDHC) card

•Secure Digital eXtended-Capacity (SDXC) card

•MultiMediaCard (MMC)

Note: While transferring data to or from a media card, such as an SD card, do not put your computer into sleep or hibernation mode before the data transfer is complete; otherwise, your data could become damaged.

For more information about flash media cards, refer to any of the following topics:

•“Inserting a flash media card” on page 39

•“Removing a flash media card” on page 40

Inserting a flash media card

Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the card.

•SD card

•SDHC card

•SDXC card

•MultiMediaCard

To insert a flash media card into the 4-in-1 media card reader slot, do the following:

1.Make sure that the card is correctly oriented.

2.Insert the card firmly into the 4-in-1 media card reader slot. The card might stop before it is completely installed into the slot.

If the flash media card is not plug and play, do the following:

1.Open Control Panel.

2.Click Hardware and Sound.

Chapter 2. Using your computer 39