Communication Interfaces
Putting the Terminal Command Together
For example, a unit only has the Remote Source Selection and
Checking the bits list under Options_1 on page 81, bits 7 and 0 each must be set to 1 to indicate that these options are installed.
The bit setting is as follows, starting with bit 15 on the left and going down to bit 0: 0000 0000 1000 0001
With the bits combined in groups of four, the binary settings can be translated into hexadecimal values.
The first two groups in the sample equal zero (0). In the third group, 1000 in binary translates to 8 in hex. In the fourth group, 0001 in binary translates to 1 in hex.
In hex this equates to (digits in the value parameter cannot have spaces between them): 0081
So your command to indicate that the Remote Source Selection and the
SPT 2 6 0081
83
