CONSOLE POWER CONNECTION
◆The Console is powered by a low voltage
◆Use up to 25 feet of 20 AWG or larger
Route the power wires from the
Connect the wires to the transformer terminals
(do not plug the transformer in until the wiring is complete).Route the power wires through the Console’s wiring access hole.
Connect the power wires from the transformer to the Console’s main terminal block AC & AC terminals.
Secure all of the wires entering the Console with a
Plug transformer into an unswitched AC outlet. Secure transformer with screw to prevent
LINEAR SECURITY CONSOLE MODEL
| MAIN TERMINAL BLOCK | ||
|
| AC | |
|
| AC | |
|
| EXT. SPKR | |
| |||
MAIN | 16 VAC, 28 VA | H/A - | |
OUTPUT RATING | |||
TERMINAL | H/A + | ||
OPTIONAL | |||
BLOCK | RELAY N.O. | ||
VOICE MODULE | RELAY DRY | ||
| |||
| MODEL: |
|
CONNECT TRANSFORMER LEADS
TO AC POWER TERMINALS
PLUG TRANSFORMER
INTO AC POWER OUTLET
THAT IS NOT CONTROLED
BY A LIGHT SWITCH
SCREW
AC POWER
OUTLET
TRANSFORMER
BACKUP BATTERY INSTALLATION (OPTIONAL)
◆A 12 volt backup battery may be installed and is highly recommended.
◆The backup battery will power the Console for up to 6 hours during AC power loss.
◆The backup battery is automatically charged by the Console when AC power is present.
◆A low backup battery will cause the Console POWER indicator to flash as it is being charged.
To install the battery, slide the battery between the retaining clamps and under the battery holder.
Position the battery until the clamps snap in place. The battery terminals should be facing the center of the Console case bottom.
Connect the black battery lead to the black battery terminal.
Connect the red battery lead to the red battery terminal.
✍WARNING: DO NOT REVERSE THE BATTERY LEADS! THE BATTERY FUSE WILL BLOW.
SLIDE BACKUP BATTERY
INTO BATTERY CLAMPS
CONNECT RED BATTERY LEAD TO RED TERMINAL
CONNECT BLACK BATTERY LEAD TO BLACK TERMINAL
CAUTION: DO NOT REVERSE BATTERY LEADS
BATTERY FUSE WILL BLOW
11