4. CONSOLE FEATURES
5
4
3
2
6
7
1
8
1
★Pressing the [FIRE] button for two seconds sounds the fire siren and sends a “fire” message to a central monitoring station through the digital communicator (if the system is monitored).
★Pressing the [EMERGENCY] button for two seconds sounds the emergency siren and sends an “emergency” message to a central monitoring station through the digital communicator (if the system is monitored).
★Both work even when system is disarmed.
★IMPORTANT: For personal emergency use only.
2MODE BUTTONS
★Used to control the Console.
OFF
★Off Mode disarms the system.
★Switching to Off Mode stops the alarm siren.
✔Multiple beeps sound and status lights flash if an alarm has occurred.
☞ Multiple beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
CHIME
★Chime Mode disarms the system.
★Switching to Chime Mode stops the alarm siren.
✔Multiple beeps sound and status lights flash if an alarm has occurred.
☞ Multiple beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
★Chime Mode is for monitoring doors and windows.
✔Use this mode as an “automatic door chime” when at home.
✔Opening any protected door or window causes Console to
HOME
★Home Mode arms the perimeter sensors, but not the interior sensors.
✔Use this mode when anyone is staying behind.
✔Interior motion detectors and interior door sensors are not armed.
✔Home secure mode makes all delayed perimeter sensors instant.
✔Secure exit mode starts an exit delay while remaining in Home Mode.
✔
AWAY
★Away Mode arms the entire system.
✔Use this mode when leaving home.
✔Door sensors set for “delayed” will have a delay that allows you to leave and enter the premises without sounding the alarm.
✔
✔Entry Delay beeps warn you to disarm the system before the siren starts.
TEST
★Test Mode is for testing the system sensors.
✔All sensor status lights blink when the Test Mode is entered.
✔Each sensor status light will stop blinking when its sensor is tested.
★Hold the [TEST] button down to test all of the Console’s indicator lights.
3MODE INDICATORS
★Specific indicator will light showing the mode the Console is in.
★HOME indicator will blink during secure exit and home instant modes.
★AWAY indicator will blink during the exit delay in the Away Mode.
4CONSOLE STATUS INDICATORS
★Show the current status of the Console.
POWER LIGHT
★Glows when AC power is on.
★Dims when AC power is off and backup battery is installed.
★Blinks when the backup battery is low, recharging or missing.
★Off when AC power is off and no backup battery is installed (system disabled).
BATTERIES LIGHT
★Blinks when one or more sensors has a low battery.
★Press [∗] key for two seconds to view sensor status. Sensor status indicator for any sensor with a low battery will light along with the BATTERIES indicator.
★Switch to Test Mode after replacing the sensor battery and completely test the system (see Test Mode). Switching to Test Mode clears the low battery indication.
TROUBLE LIGHT
★Blinks when one or more sensors have not reported status during the eight hour status time window.
★Press [∗] key for two seconds to view sensor status. Sensor status indicator for any sensor that has not reported in will light along with the TROUBLE indicator.
★Switch to Test Mode after servicing the sensor and completely test the system (see Test Mode). Switching to Test Mode clears the trouble indication.
5SIREN SPEAKER
★Makes unique sounds for burglary, fire and emergencies.
★Alarm sirens stop automatically after five minutes.
★Sounds advisory tones to confirm keystrokes from the Console.
★Sounds mode selections tones.
★Sounds alarm memory tones.
★Beeps when Automation Output is activated.
★Speaks the system status information when optional
★Terminals available for an external siren.
6STATUS INDICATORS
★Indicates the status of each of the system’s sensors.
★Lights show which doors and windows are open.
★Lights flash to display sensors that have caused an alarm.
★
7CASE ACCESS SCREW (HIDDEN)
★Remove clear display window and sensor identification card to gain access to the screw.
★Remove case access screw to unlock case. Case hinges open to the left.
8KEYPAD
★Backlit keys for easy viewing in low light conditions.
★For entering the user’s user code (numerically or alphabetically).
★Used when programming system options.
★Press [(A)] key to activate Automation Output.
★Press the [∗] key to clear keypad if the wrong key is pressed.
★Press and hold the [∗] key for one second to view sensor battery and supervisory status (see BATTERIES and TROUBLE indicator description).
6