HOME MODE

◆Use this mode when sleeping or when anyone is staying inside.

◆Home Mode causes an instant alarm when any perimeter sensor is triggered.

◆Home Mode causes a delayed alarm when any exit/entry sensor is triggered (except in Home Instant Mode when they are instant).

◆Alarm siren stops automatically after five minutes and the system will remain armed.

◆Home Mode ignores all interior sensors (motion detectors, etc.).

Arm to Home Mode by entering a user code, and pressing [HOME].

The user can “Quick Arm” to Home Mode from Off or Chime Mode by holding down the [HOME] key for two seconds. (Quick arming can be disabled; see the “Advanced Programming” section of this manual.)

❇When the system is armed to the Home Mode, the Console will sound a “Gong” and two “Beeps”.

Enter a user code and press [OFF] or [CHIME] to disarm from Home Mode and/or stop the alarm siren.

MANUAL BYPASSING OF SENSORS

◆Manual bypassing of sensors in the Home Mode allows arming of the system at night with open windows, while still having perimeter protection with other closed doors and windows.

◆The Console will resist arming with open door or window sensors.

❇Four high-low beeps to warn the user that something is open and the system will remain in the previous mode.

❇Lit sensor status indicators show which sensors are open.

To manually bypass the open sensors, arm the system again within 5 seconds.

❇A “gong” and two “beeps” will sound, the HOME indicator will light, and the open sensors will be bypassed.

✍WARNING: Bypassed sensors cannot cause an alarm.

❇If an alarm has occurred, multiple beeps will sound after disarming and the sensor light for the sensor(s) that caused the alarm will flash (switch to Off Mode again or re-arm the Console to stop the flashing alarm memory light).

SECURE EXIT

HOME MODE

START IN OFF

OR CHIME MODE

SECURE EXIT

START IN

HOME MODE

If the system is already in the Home Mode and the user wants to exit the premises while leaving someone inside with the system still in Home Mode, enter a user code and press the [HOME] key.

❇A “gong” and two “beeps” will sound and the HOME light will blink for 60 seconds. No exit delay beeps will sound during the Exit Delay.

◆ The user can leave through a door with a delayed

perimeter sensor during the 60 second Exit Delay

without causing the Console to begin an Entry Delay.

◆ Re-entering during the silent Exit Delay will

HOME

(OPTIONAL)

YOUR

USER

CODE

1 GONG

& 2 BEEPS

HOME

(OPTIONAL)

YOUR

USER

CODE

1 GONG

& 2 BEEPS

extend the Exit Delay another 60 seconds (one

time only).

✍NOTE: The Exit Delay time can be changed; see the “Advanced Programming” section of this manual.

HOME INSTANT MODE

If the system is already in the Home Mode and the user wants to make all exit/entry sensors instant, press the [HOME] key for 2 seconds.

❇Two “gongs” and two “beeps” will sound and the HOME light will blink continuously.

◆Because all exit/entry sensors will now cause an instant alarm when in Home Mode, the Console must be disarmed before opening any exit/entry delay door.

DONE

QUICK ARM

START IN OFF

OR CHIME MODE

HOLD

HOME DOWN

1 GONG

& 2 BEEPS DONE

DONE

HOME INSTANTMODE

START IN

HOME MODE

HOLD

HOME DOWN

2 GONGS & 2 BEEPS DONE

18