MAKING A SENSOR A
◆ Sensors can be programmed to cause the |
Console to chime any time they’re activated. |
◆ |
START IN TEST
alarm in any Console mode. |
◆ The sensor must have already been learned by |
the Console (see “Adding sensors to the |
System” for details). |
Start with the Console in Test Mode.
Enter the master user code then press the [TEST] button.
❇A “gong” and five “beeps” will sound.
❇The sensor status indicators will light for each sensor programmed into the Console.
Enter the sensor number from
❇The sensor indicator light will flash for the sensor number selected.
TEST
MASTER
USER
CODE
1 GONG &
5 BEEPS
SENSOR NUMBER FOR CHIME
Press [HOME], 8, then [AWAY]. A “bing” tone will sound.
Enter another sensor number or exit Setup Mode by holding the [OFF] button for three seconds.
MAKING A SENSOR INTERIOR
◆Motion detectors are automatically programmed as interior sensors. Any other sensor can also be programmed as an interior sensor.
◆Interior sensors can only trigger an alarm when the Console is in Away Mode.
◆“Home Interior” sensors can trigger an alarm when the Console is in the Home or Away mode.
◆The sensor must have already been learned by the Console (see “Adding sensors to the System” for details).
HOME
8 FOR8 TUV CHIME FUNCTIONAWAY 1 BINGDONE
START IN TEST
Start with the Console in Test Mode.
Enter the master user code then press the [TEST] button.
❇A “gong” and five “beeps” will sound.
❇The sensor status indicators will light for each sensor programmed into the Console.
Enter the sensor number from
❇The sensor indicator light will flash for the sensor number selected.
Press [HOME], 7, then [AWAY]. A “bing” tone will sound.
Enter another sensor number or exit Setup Mode by holding the [OFF] button for three seconds.
TEST
MASTER USER CODE
1 GONG &
5 BEEPS
SENSOR NUMBER FOR INTERIORHOME
7 FOR7 PRS INTERIOR FUNCTIONAWAY 1 BING
DONE
23