6MNO
PROGRAMMING STEP #63
3DEF
HOME PROGRAM
0 FOR AUDIBLE BURGLAR
1 FOR SILENT BURGLAR
AWAY STORE PROGRAM
6MNO
PROGRAMMING STEP #64
4GHI
HOME PROGRAM
0 FOR AUDIBLE EMERGENCY
1 FOR SILENT EMERGENCY
AWAY STORE PROGRAM
◆The factory setting allows the Console to be armed by holding down the mode keys for two seconds.
◆Alternately, the Console can be programmed to not allow quick arming.◆If quick arming is disabled, a user code must be entered before pressing the mode buttons.
✍NOTE: For commercial installations, it is recommended to disable quick arming to prevent customers from arming the system.
✍NOTE: If quick arming is disabled the Home Instant Mode is unavailable.
6MNO
PROGRAMMING STEP #65
5JKL
HOME PROGRAM
0 FOR QUICK ARMING OFF
1 FOR QUICK ARMING ON
AWAY STORE PROGRAM
◆The factory setting causes the Console to automatically restore any bypassed sensor when the sensor closes. After it’s restored, the sensor is ready to cause an alarm the next time it is opened.
◆Alternately, the Console can be programmed to not automatically restore (remove the bypass from) sensors that close. Bypassed sensors will remain bypassed until the system is disarmed.
6MNO
PROGRAMMING STEP #66
6MNO
HOME PROGRAM
0 FOR AUTO RESTORAL OFF
1 FOR AUTO RESTORAL ON
AWAY STORE PROGRAM
◆The factory setting requires the user to manually bypass any open sensors when the system is armed.
◆If arming is attempted with open sensors, the Console will sound five
◆Arming to the same mode again within five seconds will bypass any open sensors and arm the Console.
◆Alternately, the Console can be programmed to automatically bypass any open sensors when the system is armed.
6MNO
PROGRAMMING STEP #67
7PRS
HOME PROGRAM
0 FOR AUTO BYPASS OFF
1 FOR AUTO BYPASS ON
AWAY STORE PROGRAM
28