To Customize the Fuel Manager | Lowrance electronic LMF-200 specs

Fuel Manager

The Fuel Manager page can be customized to display the following data types: GND:S (Ground Speed), Ful:F (Fuel Flow), ECO (Fuel Economy), Ful:Rm (Fuel Remaining), USD (Fuel Used), RNG (Fuel Range), USD:Tp (Trip Fuel Used), USD:S (Fuel Used Seasonal) and WTR:S (Water Speed).

To Customize the Fuel Manager Page:

1.Use the UP and DOWN keys to scroll through the pages until the Fuel Manager page is displayed.

2.Press MENU, select CUSTOMIZE and press MENU, which will open the Data menu.

3.Highlight the desired data type and press MENU. You will be directed back to the main display, where the data type you selected will be on the display.

Trim Tabs

	The Trim Tab page can be customized to display
	Trim Tab position in percentages or degrees.
	To Customize Trim Tabs:
	1. Use the UP and DOWN keys to scroll through
	the pages until the Trim Tabs page is displayed.
	2. Press MENU, select CUSTOMIZE and press MENU.
	3. The Trim Tab Detail menu will open with two	Trim Tabs page
	options: Percentage (Pct) or Degrees (Deg).	Trim Tabs page
	options: Percentage (Pct) or Degrees (Deg).

4.Select the desired unit of measure and press MENU. The Trim Tab page will show trim tab position in the unit of measure you chose.

32

Image 38

Lowrance electronic LMF-200 manual To Customize the Fuel Manager, To Customize Trim Tabs

Contents

LMF-200 Copyright 2006 Lowrance Electronics, Inc All rights reserved Visit our web site Table of Contents Backlight Sync BL Sync Iii Page Introduction Page Preparation Recommended Tools and Supplies Installation Sequence Mounting the Gauge Wiring LMF-200 cable connections Network Backbone and Network Nodes Connecting to a Nmea 2000 NetworkCompatibility Adding a Network Node Additional Network Information Up and Down keys Menu CommandsUnderstanding this Manual Menu key Boat Setup To execute Boat Setup Pages TimeoutBasic Menu Viewing Pages Page Screen Rotation Options Pages Menu To remove a page from the display To add a page to the displayRemove Autoscroll Stay Time Pop-ups SetupTo set a Pop-Up To set Stay Time Trim Tabs Threshold set up RPM Threshold set upEngine Trim Threshold set up Pop-up Thresholds Screen Rudder Threshold set upTo adjust Backlight Backlight Contrast Audio SetupTo adjust Contrast Reverse Video Rev Video System Setup Menu To set the Deep Alarm Sonar AlarmsTo set the Shallow Alarm Reset TimeoutTo reset Eng/Tank configuration To reset values Nmea Info To access the Nmea Information screenTo access System Information screen System Information To set Speed Range To set Engine WarningsSpeed Range Pressure Range To change Speed and Distance units To set Pressure RangeUnits To change Depth units To change Temperature unitsTo change Pressure units To change GPS units Refill Tank Refill T Fuel SetupTo change Volume units To refill tank To change Economy Speed Source To use Partial FillEconomy Speed Eco spd Fuel Remaining Source FRem Src Customizing Pages To customize the Single Digital To customize the Dual Digital To Customize the Gauge To Customize the Fuel Manager To Customize Trim Tabs EP-35 Temperature Configuration To configure EP-35 Temp Sensor If all temps configured Configuration name unavailable To unconfigure EP-35 temp sensorTo reconfigure an EP-35 temp sensor EP-10 Fuel Flow Configuration If desired configuration name available To configure Fuel Flow To unconfigure an EP-10 Fuel Flow To reconfigure an EP-10 Fuel Flow If all fuel flows configured Configuration name unavailable If configuration name available EP-15 Fluid Level Configuration Fluid Level menu To configure EP-15 Fluid Level for Fuel To configure EP-15 Fluid Level for Oil To unconfigure EP-15 Fluid Level To reconfigure EP-15 Fluid Level To set a Level Warning To execute Reset commandLevel Warning Suzuki Engine Interface Configuration To configure Suzuki Engine Interface To unconfigure a Suzuki Engine Interface To reconfigure a Suzuki Engine Interface If all interfaces configured Configuration name unavailable Fuel Warning Fuel Flow Accuracy Calibrating EP SensorsEP-10 Fuel Flow Calibration Refill Tank To calibrate an EP-10 Fuel Flow Partial Fill Reset CalibrationTo execute Reset Calibration command EP-15 Fluid Level Calibration To execute 2-Point calibration Point Calibration To execute 3-Point calibration To execute 5-Point calibration Engine Interface Accuracy To Reset CalibrationCalibrating Fuel Flow in a Suzuki Engine Interface To calibrate a Suzuki Engine Interface Refill Tank Reset Calibration Calibrating EP-30 Trim Tabs Page Page Page Appendix Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… Not toll-free Accessory Ordering Information for all countries Visit our web site