Lowrance electronic LMF-200 To unconfigure EP-15 Fluid Level, To reconfigure EP-15 Fluid Level

To configure EP-15 Fluid Level for Live Well:

1.Press MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

2.Select the desired unconfigured fluid level (Unfcg FL) from the Bus Devices list and press MENU, which will launch the following message: Hit Menu to Cfg FLev Sns.

3.Press MENU, select LIVE W from the list of fluid types and press MENU. The Tank Number window will appear.

4.Assign a tank number (1, 2 or 3) to the tank using the fluid level you are configuring and press MENU. That will launch the Tank Size window.

5.Input the capacity of the tank (gallons) and press MENU. You will be directed to the Bus Devices list, where the fluid level you configured will be displayed LW Tnk1, LW Tnk2 or LW Tnk3, depending on the tank number you assigned it.

To unconfigure EP-15 Fluid Level:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

2.Select a configured Fluid Level from the Bus Devices list and press

MENU.

3.Highlight UNCONFIG (Unconfigure) and press MENU, which will launch the following message: Hit Menu to Unset Dev Name.

4.Press MENU and you will be taken back to the Bus Devices list where the fuel flow you unconfigured will be listed as UnCfg FL.

To reconfigure EP-15 Fluid Level:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

2.Select a configured Fluid Level from the Bus Devices list and press

MENU.

3.Highlight RECONFIG (Reconfigure) from the Configuration Options menu and press MENU. That will open the Fluid Type menu. Highlight the desired fluid type and press MENU. The Tank Number window will appear.

4.Assign a tank number (1, 2 or 3) to the tank using the fluid level you are configuring and press MENU. That will launch the Tank Size window. You can have up to three tanks for each fluid type.

5.Input the capacity of the tank (gallons) and press MENU. You will be directed to the Bus Devices list, where the fluid level you configured will be displayed with its new configuration.

42