Lowrance electronic LMF-200 manual To configure EP-15 Fluid Level for Fuel

To configure EP-15 Fluid Level for Fuel:

1.Make sure the Fuel Remaining Source has been set to Fluid Level. Press MENU, select SYSTEM SETUP and press MENU.

2.Highlight FUEL MNGR (Fuel Manager) and press MENU. Select FREM SRC (Fuel Remaining Source) and press MENU. Highlight FLUID LEVEL and press MENU. You will be taken back to the main display. Now we are ready to configure the sensor.

3.Press MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

4.Select an unconfigured fluid level from the bus devices list and press MENU. The fluid level menu will appear.

5.Highlight FUEL from the list of fluid types and press MENU. If your engine-tank configuration is set for multiple tanks, a menu will appear with up to three options: Port Tank, Cen (Center) Tank and Stbd (Starboard) Tank.

6.Highlight one of the three tank options and press MENU. You will be taken back to the Bus Devices list, where your newly configured Fluid Level will be listed as: F. Tnk (P), F. Tnk (C) or F. Tnk (S), depending on the tank location you chose. If you have one tank, it will be shown as F. Tnk.

To configure EP-15 Fluid Level for Fresh Water:

1.Press MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

2.Select the desired unconfigured fluid level (Unfcg FL) from the Bus Devices list and press MENU, which will launch the following message: Hit Menu to Cfg FLev Sns.

3.Press MENU, select FRESH W from the list of fluid types and press MENU. The Tank Number window will appear.

4.Assign a tank number (1, 2 or 3) to the tank using the fluid level you are configuring and press MENU. That will launch the Tank Size window.

5.Input the capacity of the tank (gallons) and press MENU. You will be directed to the Bus Devices list, where the fluid level you configured will be displayed as FrW Tnk1, FrW Tnk2 or FrW Tnk3, depending on the tank number you assigned it.

To configure EP-15 Fluid Level for Waste Water (Gray Water):

1.Press MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES and press MENU.

40