Lowrance electronic LMF-200 To set Pressure Range, Units, To change Speed and Distance units

Temperature menu with Celsius selected as the unit of measure

for example, your vessel's water pressure range is 0-30 PSI, the unnecessary figures (31-100 PSI) will only crowd the gauge display, making it harder to read.

Using the Pressure Range feature allows you to eliminate unnecessary figures from the display, giving it better resolution.

To set Pressure Range:

1.With the Synchronizer, Engine Trim, Gauge or Trim Tabs page on the screen, press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.

2.Select PRES RNGS and press MENU. The Select Pressure menu will appear with five options: WTR:P (Water Pressure), Eng:O:P (Engine Oil Pressure), FUL:P (Fuel Pressure), BST:P (Boost Pressure) and Trn:O:P (Transmission Oil Pressure).

3.Highlight the desired page and press MENU. The Pressure Range menu will appear with four options: 0-30 PSI, 0-60 PSI, 0-80 PSI and 0-

100PSI.

4.Choose the desired range and press MENU. You will be taken back to the main display. If you want to set the Pressure Range for other pages that support the Pressure Range feature, scroll

the desired page on to the screen and repeat Steps 1-4.

Units

You can access the UNITS menu from the System Setup menu. It has five units of measure from which to choose: Speed/Distance, Temperature, Pressure, Depth, GPS and Volume.

To change Speed and Distance units:

Choosing Speed and Distance from the Change Units menu will allow you to set the unit of measure for speed and distance to Statute, Nautical or SI (Metric).

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.

2.Highlight UNITS and press MENU. Select SPD/DIST and press MENU, which will launch the Speed and Distance menu with the following options: Statute, Nautical and SI (Metric) units.

3.Select one of the three options and press MENU, which will take you back to the main display.

25