3.Use the UP and DOWN keys to input the amount of fuel you added to the tank and press MENU. You will be directed to the main display.
Calibrating EP-30 Trim Tabs
Trim Tabs are calibrated though the Trim Tab menu. If the Trim Tab page has not been added to the page screen rotation, see the Add Page segment in Section 3: Operation.
1.Make sure the Trim Tab page is on the main display, then press MENU to access the Trim Tab page menu.
2.Press MENU, select CAL TAB and press MENU.
The following message will appear: Set Tabs Full Up hit Menu.
3.Adjust the Trim Tabs to the Full Up Position and press MENU. A second message will appear: Run Tabs Full DN (Down).
4.Adjust the Trim Tabs into the full down position. The Trim Tabs are now calibrated. You will be taken back to the main display.
57
