Configuring IPX RIP Protocol (Layer 3)
Example: Suppress Advertising of Network 10
To configure your switch to suppress the advertising of network 10 on the IPX interface named Backbone:
1.In the IPX RIP Configuration section of the Web Agent, click Filters.
2.Click Create to create a new filter. The Add IPX RIP Filter dialog box opens.
3.Configure the following parameters:
a.From the Interface
b.In the Precedence field, enter 0.
c.In the Start Network field, enter 10.
d.In the End Network field, enter 10.
e.From the Direction
f.From the Filter/Suppress
g.In the Ticks and Hops fields, enter 0.
4.Click CREATE to save your changes, or CANCEL to restore previous settings.
This filter ensures that all advertising of network 10 from the interface Backbone is suppressed.
Example: Suppress Advertising of all Networks Except 10
To configure your switch to suppress the advertising of all networks except network 10 on the IPX interface named Backbone, you must create two filters.
To create these filters:
Filter 1
1.In the IPX RIP Configuration section of the Web Agent window, click Filters.
2.Click Create to create a new filter. The Add IPX RIP Filter dialog box opens.
3.Configure the following parameters:
a.From the Interface
b.In the Precedence field, enter 0.
c.In the Start Network field, enter 10.
d.In the End Network field, enter 10.
e.From the Direction
f.From the Filter/Suppress
Cajun P550/P220 Switch Operation Guide |