Configuring IP Routing (Layer 3)

4.Use Table 7-3 to complete the configuration of your IP interface:

Table 7-3.IP Interfaces

Parameter

Allows you to...

 

 

Select

Select the interface to configure.

 

 

State

Shows the current running condition of the switch. Options

 

include:

 

•

UP - The interface is active.

 

•

DOWN - The interface is inactive.

 

 

Interface

Enter an interface name from the interfaces you have

 

previously configured.

 

 

Admin State

Shows the administration state of the interface. The default

 

setting is UP. Options include:

 

•

UP - Indicates an active state.

 

•

DOWN - Indicates an inactive state.

 

 

VLAN

Select a VLAN associated with the selected interface from the

 

VLANs you have previously configured.

 

 

Network Address

Assign an IP address to the VLAN you previously selected.

 

 

Mask

Assign a subnet mask for the interface.

 

 

MAC Format

Specify the MAC format (Ethernet V2 or SNAP).

 

 

IP Routing

Enable or disable IP Routing on the interface. When set to

 

Routing/Mgmt, you can both manage the switch (from the

 

CLI or Web Agent), and configure IP Routing for the switch.

 

When set to Mgmt Only, you can manage the switch,

 

however, IP routing is disabled.

 

Note: When the interface has a VLAN identified as

 

 

Serial-Console, the only valid IP routing

 

 

option is Mgmt Only.

 

 

RIP

Enable or disable RIP for a given interface.

 

 

OSPF

Enable or disable OSPF for a given interface.

 

 

Multicast Protocol

Select a multicast protocol to associate with your interface.

 

Selections include: DVMRP, IGMP, and None. IGMP is

 

enabled automatically when DVMRP is selected.

 

 

Proxy ARP

Enable or disable Proxy ARP on a given interface.

 

 

ICMP Redirect

Enable or disable ICMP Redirect on a given interface.

 

 

 

7-6

Cajun P550/P220 Switch Operation Guide