Configuring the Cajun P550 Switch (Layer 2 & Layer 3)

Table 3-7describes Switch Port configuration parameters:

Table 3-7.Switch Port Configuration Parameters

 

 

Parameter

Definition

 

 

Port VLAN

Specifies the VLAN assignment for this port.

 

 

Trunk Mode

Select the trunk mode.Allows you to define

 

the port as a trunk and allows you to select

 

the appropriate VLAN trunking format if the

 

port is connected to another switch. Refer to

 

Table 3-8 for more information on trunk

 

mode options.

 

 

Frame Tags

Select whether to ignore or use received

 

Frame VLAN tags. If you ignore VLAN tags

 

on incoming frames, the frames are bound to

 

the port’s default VLAN. The default value is

 

Use.

 

 

VLAN Binding

Select the port’s outgoing VLAN binding

 

type. Refer to Table 3-9 for more information

 

on VLAN binding options.

 

 

Automatic VLAN

Select to enable or disable the ability to

Creation

automatically create a VLAN each time the

 

port receives a frame from an unknown

 

VLAN. The default value is Disable.

 

 

VTP Snooping

Select to enable or disable VTP Snooping on

 

this port. The default value is Disable.

 

 

Allow Learning

Select to enable or disable the port’s learning

 

of new addresses. The default value is

 

Enable.

 

 

Hunt Group

Select a hunt group for which this port will

 

be a member. The default value is None.

 

 

Spanning Tree Mode

Select to enable or disable spanning tree

 

protocol on this port. The default value is

 

Enable.

 

Note: For the Cajun P220 switch, you

 

will be unable to modify this

 

feature on the CPU switch port.

 

 

Fast Start

Select to enable or disable fast start on this

 

port. The default value is Disable.

 

Note: For the Cajun P220 switch, you

 

will be unable to modify this

 

feature on the CPU switch port.

 

 

Cajun P550/P220 Switch Operation Guide

3-15