Lucent Technologies P550 Viewing the Event and Shutdown Logs

Monitoring the Cajun Switch (Layer 2 & Layer 3)

6.Use Table 16-3 to configure your protocol event log settings:

Table 16-3.Protocol Event Log Settings

Parameter	Enables or disables the logging of...
Fault	Serious errors that can cause a system crash, for example,
	panic.
Error	Serious errors that will not cause a system crash but can
	contribute protocol problems.
Warning	Non-critical errors.
Info	Event details.
Trace	RIP and OSPF packet tracing.
Debug	Event messages used to troubleshoot a network problem.

7.Click APPLY to save your changes, or CANCEL to restore previous settings.

Viewing the Event and Shutdown Logs

To view the Event and Shutdown logs:

1.In the Event Subsystem section of the Web Agent window, click either Event Log or Shutdown Log. An Event or Shutdown Log Search dialog box opens.

2.In the Search By: column, click the Severity Level checkbox.

3.From the Severity Level pull-down menu, select the severity level to filter on a particular severity level for events.

4.From the Event Type pull-down menu, select an event to filter on a particular Event Type. The selected event log entries open in the Event Log dialog box.

5.Use Table 16-4 for a description of the entries in the event and shutdown logs:

	Table 16-4.Event and Shutdown Log Entries
Entry	Definition
Log ID	Displays the number of this event in the log FIFO (First In First
	Out).
Event ID	Displays an index that identifies the event class.
Time Stamp	Displays the date and time the event was recorded in the log.

Cajun P550/P220 Switch Operation Guide 16-5