Configuring the Cajun P550 Switch (Layer 2 & Layer 3)

Figure 3-1.Layer 2/Layer 3 CLI Setup Command Display

Welcome to Switch Setup. The brief series of questions that follows will help you to configure this switch. After completing this process, you will be able to manage the switch using:

-the switch-based HTTP server

-the Element Management System.

Text in [] is the default answer for each questions. To accept the default, press ENTER.

Would you like to change the super user password [Yes]? Y

Old Password: xxxx

New Password: xxxx

Re-type New Password: xxxx

User password changed succesfully

What do you want the switch manager's console

Ethernet IP Address to be [0.0.0.0]? 10.0.0.1

What is the subnet mask for your network's

IP address [0.0.0.0]? 255.255.255.0

What is the IP address of the default gateway for this network segment [0.0.0.0]?

You can now connect to the switch using the front-panel out-of-band 10Base-T connection. This allows you to log in using either the embedded web agent or the EMS.

See the Installation and Operation guides for instruction on establishing additional IP network connections.

Connect to the system with an out-of-band connection using the 10Base-T port on the supervisor module front panel for Layer 2 or 10/100Base-T port on the supervisor module for Layer 3.

Figure 3-2.Cajun P550 Switch

Attach serial port cable here

Attach Ethernet cable here

3-4

Cajun P550/P220 Switch Operation Guide