Configuring IP Routing (Layer 3)
Examining DVMRP Interface StatisticsDVMRP interface statistics list active DVMRP interfaces and provide specific information on each interface.
To examine DVMRP statistics:
1.In the DVMRP Display section of the Web Agent window, click Interface Statistics. The DVMRP Interface Statistics dialog box opens.
2.Perform one of the following...
Click REFRESH to view the latest interface statistics. Click CLEAR All to reset all statistics to zero.
Select one interface, and click CLEAR to reset the selected interface.
3.Use Table
Table | ||
|
| |
Parameter | Defines the... | |
|
| |
DVMRP Interface | IP interface configured with the DVMRP multicast routing | |
| protocol. | |
|
| |
Network Address | IP address of the interface configured with the DVMRP | |
| multicast. | |
|
| |
Address Mask | IP subnet mask associated with the interface. | |
|
| |
State | Current status of the interface. Possible status indications | |
| include: | |
| • | UP - The interface is active. |
| • | DOWN - The interface is inactive. |
|
| |
Type | Type of interface configured. Possible values include: | |
| • | Broadcast - All traffic is forwarded through the routers. |
|
| This is not a tunnel and does not require encapsulation. |
| • | IPIP Tunnel - All multicast traffic (data and protocol |
|
| messages) on this interface is encapsulated in IP unicast |
|
| packets with the protocol set to IPIP (IP in IP). |
| • | |
|
| this interface is IPIP encapsulated, but the protocol |
|
| messages are simple unicast. |
|
| |
Metric | Interface cost. | |
|
| |
IGMP Querier on | Router is the IGMP querier. The purpose of the IGMP querier is | |
Interface | to periodically poll hosts on your network to trigger group | |
| membership reports. | |
|
| |
Next Probe Message in | Time (in seconds) remaining until the next probe message is | |
(sec) | sent. | |
|
|
|
Cajun P550/P220 Switch Operation Guide |