Configuring AppleTalk Routing (Layer 3)

Creating an AppleTalk Static Route

To create an AppleTalk static route:

1.In the AppleTalk Configuration section of the Web Agent window, click Static Route. The AppleTalk Static Route dialog box opens.

2.Click CREATE to add a new static route. The Add AppleTalk Static Route dialog box opens.

3.Use Table 10-2 to configure your static route.

Table 10-2.AppleTalk Static Route Parameters

Parameter

Definition

 

 

Network Range Start

Enter the starting network number. The network number

 

specifies the range of AppleTalk network numbers for

 

extended networks. Each number in the range must be an

 

integer between 1 and 65279.

 

Note: Network Range Start must be less than or

 

 

equal to Network Range End.

 

 

Network Range End

Enter the ending network number. The network number

 

specifies the range of AppleTalk network numbers for

 

extended networks. Each number in the range must be an

 

integer between 1 and 65279.

 

 

Network Number

Enter the next hop network number. This number specifies

 

the network number of the next hop router for the

 

network range.

 

 

Node

Enter the next hop node identification number. This

 

number must be between 1 and 253.

 

 

Type

Select the type of static route.

 

Options include:

 

•

High - The static route is not superseded by a route

 

 

update.

 

•

Low - The static route can be superseded by a route

 

 

update.

 

 

Zone

Enter an AppleTalk zone name assigned to this route. Zone

 

names may be up to 32 characters in length.

 

 

 

4.Click CREATE to add the static route, or CANCEL to restore previous settings.

10-6

Cajun P550/P220 Switch Operation Guide