Lucent Technologies P550 Enabling VRRP, Enabling VRRP on an Interface, Creating a VRRP Virtual Router

Configuring IP Routing (Layer 3)

Enabling VRRP

To enable a VRRP virtual router:

1.In the IP Configuration section of the Web Agent window, click Global Configuration. The IP Global Configuration dialog box opens.

2.From the VRRP pull-down menu, select Enable.

3.Click APPLY to save your changes, or CANCEL to restore previous settings.

Enabling VRRP on an Interface

To enable an VRRP virtual router on an interface:

1.In the IP Configuration section of the Web Agent window, click Interfaces. The IP Interfaces dialog box opens.

2.Select the interface to be enabled.

3.From the VRRP pull-down menu for your interface, select Enable.

4.Click APPLY to save your changes, or CANCEL to restore previous settings.

Note: You must enable VRRP globally from the IP Configuration/Global

Configuration dialog box.

Creating a VRRP Virtual Router

To create a VRRP router:

1.In the IP Configuration section of the Web Agent window, click VRRP Configuration. The VRRP Configuration dialog box opens.

2.Click CREATE. The Add VRRP Virtual Router dialog box opens.

3.Use Table 7-31to configure your VRRP parameters:

	Table 7-31.VRRP Configuration Parameters
Parameter		Defines...
Interface		The name associated with the selected interface to
		configure.
VR ID		The reporting virtual router’s identification. The ID
		range is 1-255 (decimal).
IP Address		The virtual router’s IP address.

Cajun P550/P220 Switch Operation Guide 7-43