Configuring IPX SAP Protocol (Layer 3)
2.Click CREATE to create a new filter. The Add IPX SAP Name Filter dialog box opens.
3.Use Table
| Table | |
|
| |
Parameter | Allows you to... | |
|
| |
Interface | Select the interface to which this filter will be applied to SAP | |
| packets sent and/or received on the interface. | |
|
| |
Precedence | Specify the filter precedence (in order of importance) with 0 equal | |
| to most important. | |
| Note: All SAP filters on the same interface must be | |
|
| assigned a unique precedence value. |
|
| |
Name | Specify a service name. For example, FS_ENG001. A single asterisk | |
| may be present as the last character, which will match all remaining | |
| characters of a service name. | |
|
| |
Type | Specify the service type that identifies the type of service the server | |
| provides. | |
| ||
| • Unknown (0) | |
| • Print Queue (3) | |
| • | File Server (4) |
| • | Job Server (5) |
| • | Print Server (7) |
| • | Archive Server (9) |
| • Remote Bridge Server (24) | |
| • | Advertising Print Server (47) |
| • NetWare Directory Services [NDS] (278) | |
| A value of ffff matches all service type values. | |
|
| |
Direction | Select the direction of the filter in question. | |
| Filter choices include: | |
| • | Inbound - Applies the filter only to SAP packets received on |
|
| the interface. |
| • | Outbound - Applies the filter only to SAP packets sent on the |
|
| interface. |
| • | Both - Applies the filter to SAP packets both sent and received |
|
| on the interface. |
|
|
|
Cajun P550/P220 Switch Operation Guide |