Lucent Technologies P550 Deleting Static Multicast Sessions

Managing Intelligent Multicasting (Layer 2 & Layer 3)

3.Use Table 15-6 to configure the new multicast session.

	Table 15-6.Static Multicast Session Configuration Parameters
Parameter		Definition
IP Address		The IP address of the new static multicast session. The
		range must be between 224.0.1.0 to 239.255.255.255.
MAC Address		Enter the MAC address of the new static multicast session.
		Specifying the MAC address is not used for an IP multicast
		session.
VLAN		Enter the VLAN associated with the new multicast session.
		Click All to add all VLANs to the multicast session, or select

aspecific VLAN from the pull-down menu.

4.Click CREATE to create the new static multicast session, or CANCEL to restore previous settings.

Deleting Static Multicast Sessions

To delete a static multicast session:

1.In the Intelligent Multicasting section of the Web Agent window, click Static Sessions. The Static Multicast Sessions dialog box opens.

2.Use Table 15-7 for more information on static multicast sessions.

	Table 15-7.Static Multicast Sessions Parameters
Parameter		Definition
Select		Select the static multicast session to be modified.
VLAN		Displays the VLAN on which the static multicast session exists.
MAC Address		Displays the MAC address of the static multicast session.
IP Address		Displays the IP address associated with the static multicast session,
		if available.
Static Client Ports		Displays the number of static client ports associated with the static
		multicast session and opens the Static Multicast Session Client
		Ports dialog box.

3.Click DELETE to remove your selected static multicast session, or CANCEL to restore previous settings.

15-10 Cajun P550/P220 Switch Operation Guide