Managing Intelligent Multicasting (Layer 2 & Layer 3)
2.Click Display/Configure Router Ports. The Router Port Display/Configuration dialog box opens.
3.In the Static Router Port Configuration section, enter a port number in the Port field.
4.In the VLAN column, click All to add this router port to all VLANs. Or
From the VLAN
Note: When adding a router port to all VLANs, the router port is added only to the VLANs bound to the switch port. To bind multiple VLANs to a switch port, refer to Chapter 3 in this guide.
5.Click CREATE to save your changes.
Searching for Intelligent Multicast Sessions
To perform a session search:
1.In the Intelligent Multicasting section of the Web Agent window, click Session Search. The Intelligent Multicast Session Search dialog box opens.
2.Use Table
Table
Parameter | Display only multicast sessions... | |
|
| |
IP Subnet | With this IP subnet. | |
| • | IP Address - The destination IP multicast address portion of |
|
| the subnet on which to search. |
| • | IP Address Mask - The subnet mask portion of the subnet on |
|
| which to search. |
|
| |
MAC Address | That have this destination MAC address (or portion of this MAC | |
| address). | |
|
| |
VLAN | That are on this VLAN. | |
|
| |
Client Port | With a client port matching this switch port. | |
|
| |
Session Type | Of this session type. | |
| • | Learned - Session is dynamically learned. |
| • | Mgmt - Session is configured statically by the user. |
|
|
|
3.Click SEARCH to begin the search for the multicast session. The Multicast Sessions dialog box opens with the search results.
Cajun P550/P220 Switch Operation Guide |