Lucent Technologies P550 Configuring Physical Port Parameters on Gigabit Ports

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)

7.From the Access Type pull-down menu, select an access type (Table 3-3).

Table 3-3.User Account Access Levels

User Level	Can	Cannot
User (READ_ONLY)	View switch configuration	View user accounts and community
	settings and statistics.	strings. Change switch
		configurations.
Manager	View and set switch	View user accounts and community
(READ_WRITE)	configuration settings, and	strings.
	view statistics.
Administrator	View and set all switch	N/A
(ADMINISTRATOR)	parameters.

8.Click APPLY save your changes, or CANCEL to restore previous settings.

Configuring Port Parameters Using the Web Agent

The system has two levels of port settings:

❒Physical port parameters - Allows you to set up rules that guide the system’s physical layer interaction (for example, enable/disable, speed, auto-negotiation).

❒Switch port parameters - Allows you to specify how the port participates in switching (for example, VLAN mode, trunking).

The sections that follow explain how to configure these ports.

Configuring Physical Port Parameters on Gigabit Ports

To configure ports on a gigabit module:

1.In the System Configuration section of the Web Agent window, select Modules & Ports. The Module Information dialog box opens.

2.In the Ports column, click the number (2 or 4 for gigabit modules) for the module you want to configure. The Physical Port Configuration dialog box opens.

3.Click Enable to enable a port, or if the check box is enabled, click Enable if you want to disable the port.

4.Click APPLY to save your settings, or CANCEL to restore previous settings.

5.In the Name field, click the port name to set additional parameters. The Detailed Physical Port Configuration dialog box opens.

Cajun P550/P220 Switch Operation Guide 3-7