Configuring IP Routing (Layer 3)

 

 

 

 

 

 

 

Table 7-3.IP Interfaces (Continued)

 

 

 

 

 

 

Parameter

 

Allows you to...

 

 

 

 

 

 

 

NetBIOS UDP

 

Configure your switch for InterVLAN forwarding of NetBIOS

 

 

Rebroadcast

 

broadcasts. NetBIOS parameters include:

 

 

 

 

•

Inbound - Allow the receipt of NetBIOS replies.

 

 

 

 

•

Outbound - Allow the transmission of NetBIOS

 

 

 

 

 

broadcasts.

 

 

 

 

•

Both - Allow the interface to both receive NetBIOS

 

 

 

 

 

replies and send NetBIOS broadcasts.

 

 

 

 

•

Disable - Disallow both the receipt of NetBIOS replies

 

 

 

 

 

and the transmission of NetBIOS broadcasts.

 

 

 

 

 

 

 

VRRP

 

Enable or disable VRRP on a given interface. The default

 

 

 

 

value is Disable.

 

 

 

 

 

 

 

5.Click CREATE to save changes, or CANCEL to restore previous settings.

Note: Routing is not supported on the serial interface. Do not configure

Routing/Mgmt on serial IP interfaces.

IP Multinetting

Using the Cajun P550 switch, you set up IP multinetting—a configuration of multiple subnets on a single VLAN. A network is said to be multinetted (Figure 7-1) when multiple logical groups of computers are brought together within a single broadcast domain. To create a multinetted network, you assign multiple subnets to a VLAN.

Figure 7-1.Multinet Diagram

Ports Server

192.168.60.0Ethernet

segment

Cajun

PC

VLAN

PC

192.168.10.0

Cajun P550/P220 Switch Operation Guide

7-7