Configuring IP Routing (Layer 3)

 

 

 

 

 

 

 

Table 7-1.Add IP Interface Parameters

 

 

 

 

 

 

Parameter

 

Allows you to...

 

 

 

 

 

 

 

MAC Format

 

Select the MAC address format for the interface.

 

 

 

 

Options include:

 

 

 

 

• Ethernet V2

 

 

 

 

• Simple Network Access Protocol (SNAP)

 

 

 

 

 

 

 

IP Routing

 

Select to enable or disable IP routing on the interface.

 

 

 

 

Options include:

 

 

 

 

Routing/Mgmt - Enables you to manage the switch,

 

 

 

 

 

from the Command Line Interface (CLI) or the Web

 

 

 

 

 

Agent, and configure IP routing for the switch.

 

 

 

 

Mgmt Only - Enables you to manage the switch,

 

 

 

 

 

however, IP routing is disabled.

 

 

 

 

Default - Enables you to configure IP routing for the

 

 

 

 

 

switch, however, you cannot manage the switch.

 

 

 

 

Note: When you set up IP routing for an interface,

 

 

 

 

 

the Default selection is automatically

 

 

 

 

 

chosen. The IP interface is created with the

 

 

 

 

 

default IP routing option on the VLAN

 

 

 

 

 

associated with the interface.

 

 

 

 

 

 

 

RIP

 

Enable or disable RIP. The default value is Disable.

 

 

 

 

 

 

 

OSPF

 

Enable or disable OSPF. The default value is Disable.

 

 

 

 

 

 

 

Multicast Protocol

 

Specify the multicast protocol for the interface. Options

 

 

 

 

include:

 

 

 

 

• None

 

 

 

 

• DVMRP

 

 

 

 

• IGMP

 

 

 

 

 

 

 

Proxy ARP

 

Enable or disable Proxy ARP. The default value is Disable.

 

 

 

 

 

 

 

ICMP Redirect

 

Enable or disable ICMP Redirect (IDRP). The default value

 

 

 

 

is Enable.

 

 

 

 

 

 

 

NetBIOS UDP

 

Enable or disable NetBIOS UDP Rebroadcasts. The default

 

 

Rebroadcast

 

value is Disable.

 

 

 

 

 

 

 

VRRP

 

Enable or disable Virtual Redundancy Router Protocol. The

 

 

 

 

default value is Disable.

 

 

 

 

 

 

 

4.Click APPLY to save your changes, or CANCEL to restore previous settings.

Cajun P550/P220 Switch Operation Guide

7-3