
Configuring IP Routing (Layer 3)
advertisements. When a host attached to a multicast link starts up, it may multicast a router solicitation to ask for immediate advertisements, rather than waiting for the next periodic one to arrive.
If no advertisements arrive, the host may
To enable IRDP on an interface:
1.In the IP Configuration section of the Web Agent window, click IRDP. The ICMP Router Discovery Protocol dialog box opens.
2.In the Select column, choose the interface on which to enable IRDP.
3.Use Table
Table
Parameter | Definition | |
|
| |
Select | Selects the interface to be configured. | |
|
| |
Interface | Displays the IRDP interface. | |
|
| |
Network Address | Displays the network IP address of the IRDP interface. | |
|
| |
IRDP State | Select to enable or disable IRDP on the selected interface. | |
| The default is Enable. | |
|
| |
Preferences | Enter the preference of the address as a default router | |
| address, relative to other router addresses on the same | |
| subnet. The minimum value (80000000 hex) is used to | |
| indicate that the address should not be used by neighboring | |
| hosts as a default router address, even though it may be | |
| advertised. The default is 0. | |
|
| |
Adv. Address | Select an IP destination address used for multicast router | |
| advertisements sent from the interface. | |
| Options include: | |
| • | Multicast - Used on any link where listening hosts |
|
| support IP multicast. The default is 224.0.0.1. |
| • | Broadcast - Used on any link where listening hosts |
|
| support IP unicast. The default is 255.255.255.255. |
|
|
|
Cajun P550/P220 Switch Operation Guide |