Using VLANs, Spanning Tree, and Hunt Groups (Layer 2 and Layer 3)

 

 

 

 

 

 

 

Table 12-4.Bridge-Level Parameters (Continued)

 

 

 

 

 

 

Parameter

 

Definition

 

 

 

 

 

 

Bridge Forward Delay

Amount of delay used when a port transitions to the

 

 

 

 

forwarding state. Set by the root bridge for the segment.

 

 

 

 

Note: You must enter a value within the supported

 

 

 

 

range or the configuration operation will

 

 

 

 

fail. The supported value range for this

 

 

 

 

parameter is 10-30.

 

 

 

 

 

 

 

Max Age

 

Current maximum age for this spanning tree. Determined

 

 

 

 

by the root bridge.

 

 

 

 

 

 

 

Hello Time

 

Current hello time for this spanning tree. Determined by

 

 

 

 

the root bridge.

 

 

 

 

 

 

 

Forward Delay

 

Current forwarding delay for this spanning tree. Set by the

 

 

 

 

root bridge.

 

 

 

 

 

 

7.Click APPLY to save your changes, or CANCEL to restore previous settings.

Configuring Spanning Tree Bridge Ports

To configure spanning tree bridge ports:

1.In the Switching Parameters section of the Web Agent window, click Spanning Tree. The Spanning Tree Information dialog box opens.

2.In the Bridge Ports column, click the port number listed. The Spanning Tree Bridge Port Information dialog box opens.

3.Use Table 12-5 to configure the Spanning Tree Bridge port parameters:

 

Table 12-5.Spanning Tree Bridge Port Parameters

 

 

 

Parameter

 

Options

 

 

 

Bridge Port

 

The bridge port.

 

 

 

Port

 

The spanning tree bridge port number.

 

 

 

Name

 

The name assigned to the bridge port.

 

 

 

Cajun P550/P220 Switch Operation Guide

12-9