Monitoring and Configuring the Forwarding Cache (Layer 3)
3.Use Table
Table
Parameter | Allows you to search for all entries... | |
|
| |
Destination Address | Within the routing cache that match the specified destination | |
| address (IP address). | |
|
| |
Source Address | Within the routing cache that match the specified source | |
| address (IP address). | |
|
| |
Protocol | By protocol identifier. By default, this field is 0 for IP (for | |
| example, not supported by IP). | |
|
| |
Destination Port | Within the routing cache that match the specified destination | |
| port (IPU, IPM, IPX). | |
|
| |
Source Port | Within the routing cache that match the specified source port | |
| (IPU, IPM, IPX). | |
|
| |
Comparison Value | Within the routing cache that match the specified comparison | |
| value (TCP/UDP). Values include: | |
| • | DA - Destination address |
| • | DASA - Destination and source address |
| • | DAPROT - Destination address and protocol |
| • | DADP - Destination address and destination port number |
| • | DASAPROT - Destination and source address and |
|
| protocol |
| • | DASADPSP - Destination and source address, and the |
|
| corresponding destination and source port numbers |
|
| |
VLAN | Within the routing cache that match the specified VLAN name. | |
|
| |
Rule Number | Within the routing cache that matches the specified rule | |
| number associated with an access list. | |
|
| |
PRE | That match the PRE that is associated with the fabric port ID. | |
|
|
|
To display the forwarding cache information:
1.In the L3 Forwarding Cache section of the Web Agent window, click Forwarding Cache. The FE Cache dialog box opens.
2.To modify your FE Cache table, perform one of the following:
•To delete one or more entries, select the entry and click Flush Entry.
•To flush (clear) the entire table, click Flush Table.
•To refresh the contents of the table, click REFRESH.
Cajun P550/P220 Switch Operation Guide |