Configuring the Cajun P550 Switch (Layer 2 & Layer 3)

To configure the switch as a LAN router:

1.Create a IP interface for each subnet. Refer to “Creating and Implementing VLANs”, in Chapter 12.

2.Create or assign a VLAN to the IP interface. Refer to “Assigning IP Interfaces to the VLAN”, in Chapter 7.

3.Bind ports to the VLANs assigned to the IP interfaces. Refer to “Viewing Switch Port Parameters”, earlier in this chapter.

4.Assign an IP address and subnet mask to the VLAN. Refer to “Assigning IP Interfaces to the VLAN”, in Chapter 7.

5.Specify how the router will communicate with other routers. Refer to “Assigning IP Interfaces to the VLAN”, in Chapter 7, to configure OSPF and RIP parameters.

Configuring System Information

The System Information section of the Web Agent allows you to configure general system information and settings, such as:

❒Entering General System Information

❒Enabling SNTP

❒Setting Summer Time Hours

❒Displaying the Power System Statistics

❒Displaying Cooling System Statistics

❒Configuring Redundant Hardware

❒Performing a System Reset

❒Viewing Your Running Configuration

❒Viewing Your Startup Configuration

❒Viewing Your Script Execution Log File

❒Copying Configuration Files

❒Copying Files

3-32

Cajun P550/P220 Switch Operation Guide