Lucent Technologies P550 Modifying RIP Interfaces

Configuring the RIP Routing Protocol (Layer 3)

Table 8-1.	RIP Global Configuration Parameters (Continued)
Parameter	Allows you to...
Purge TTL	Specify the global Time To Live (TTL) in seconds that the RIP
	update persists. The default value is 120 seconds.
Triggered Updates	Enable or disable route updates that were triggered by a
	topology change in the network to be added to the routing
	table. The default is Enable.
Update Pkt Delay	Specify the value (in seconds) that represents the time delay
	between successive RIP update packets to the neighbor, when
	the update requires multiple packets. The default value is 0
	seconds (no delay).

3.Click APPLY to save your changes, or CANCEL to restore previous settings.

Modifying RIP Interfaces

To modify the RIP interfaces:

1.In the RIP Configuration section of the Web Agent window, click Interfaces. The RIP Interfaces dialog box opens.

2.Use Table 8-2 to modify RIP interfaces:

	Table 8-2.RIP Interface Parameters
Parameter	Allows you to...
Select	Select the RIP interface to be modified.
Interface	Displays an interface from a list of interfaces that you
	previously configured.
Network Address	Displays an IP address to be associated with the displayed
	interface.
Mode	Specify the RIP State. Different states include:
	•	talk only (send RIP information to the network)
	•	listen only (receive RIP information from the network)
	•	talk/listen (both send and receive RIP information from
		the network)
Send Version	Specify the version of RIP you want to use to send packets
	across your interface. Selections include:
	• V1
	• V2
	• V1/V2

8-2 Cajun P550/P220 Switch Operation Guide