ng multiple lays…
2Look at the Microsoft DirectX label.
Solution If DirectX 7.0 or later isn’t installed, install it. Run the setup program from the DirectX folder of the Matrox installation
Problem After restarting computer, Windows 98/Me warns that the graphics card isn’t configured correctly
Cause You may have a conflict because of previously installed display drivers.
Solution Delete all existing display drivers and reinstall Matrox display drivers.
1If Windows prompts you to start the Add New Hardware Wizard, click Cancel. (If you start the Wizard, it will not detect your graphics card.)
2Click Start # Control Panel # System
Manager.
3Click the plus sign next to Other devices (if it appears) and
Display adapters.
4Delete all listed display adapters (click each, then click Remove), then click OK.
5Restart your computer and reinstall the Matrox display drivers (see page 8).
Problem Using multiple displays under Windows 98/Me/2000/XP or NT 4.0, program doesn’t work with main graphics card
Cause Your main graphics card may not be controlling your primary display. The graphics card that controls your primary display is the one that first displays information when you restart your computer. (A
Programs that don’t recognize multiple displays may not work with a graphics card unless it’s controlling your primary display.
Your computer BIOS (Basic Input/Output System) and the slot type (ISA, PCI or AGP – see “Choose an expansion slot”, page 3) of each graphics card help determine which graphics card controls your primary display.
