Mitsubishi Electronics FR-F700 261, 262, 263, 264, 265, 266, 267, 268, 269, 299, 331, 332, 333

Function	Parameters	Name	Setting Range	Increments	Initial Value	Refer to
						page
stop	261	Power failure stop selection	0, 1, 2	1	0	43
	262	Subtracted frequency at deceleration	0 to 20Hz	0.01Hz	3Hz	43
failure		start
	263	Subtraction starting frequency	0 to 120Hz, 9999	0.01Hz	60Hz	43
Power	264	Power-failure deceleration time 1	0 to 3600/ 360s	0.1/0.01s	5s	43
	265	Power-failure deceleration time 2	0 to 3600/ 360s, 9999	0.1/0.01s	9999	43
	266	Power failure deceleration time	0 to 400Hz	0.01Hz	60Hz	43
		switchover frequency
	267	Terminal 4 input selection	0, 1, 2	1	0	35
	268	Monitor decimal digits selection	0, 1, 9999	1	9999	32
	269	Parameter for manufacturer setting. Do not set.
	299	Rotation direction detection selection at	0, 1, 9999	1	9999	33
		restarting
	331	RS-485 communication station	0 to 31(0 to 247)	1	0	38
	332	RS-485 communication speed	3, 6, 12, 24, 48, 96, 192,	1	96	38
			384
	333	RS-485 communication stop bit length	0, 1, 10, 11	1	1	38
	334	RS-485 communication parity check	0, 1, 2	1	2	38
communication		selection
		RS-485 communication waiting time
	335	RS-485 communication number of	0 to 10, 9999	1	1	38
		retries
	336	RS-485 communication check time	0, 0.1 to 999.8s, 9999	0.1s	0s	38
		interval
-485	337	setting	0 to 150ms, 9999	1	9999	38
	338	Communication operation command	0, 1	1	0	44
RS		source
	339	Communication speed command source	0, 1, 2	1	0	44
	340	Communication startup mode selection	0, 1, 2, 10, 12	1	0	37
	341	RS-485 communication CR/LF selection	0, 1, 2	1	1	38
	342	Communication EEPROM write selection	0, 1	1	0	38
	343	Communication error count		1	0	38
output	495	Remote output selection	0, 1	1	0	44
	496	Remote output data 1	0 to 4095	1	0	44
Remote	497	Remote output data 2	0 to 4095	1	0	44
Maintenance	503	Maintenance timer	0 (1 to 9998)	1	0	44
	504	Maintenance timer alarm output set time	0 to 9998, 9999	1	9999	44
Communication	549	Protocol selection	0, 1	1	0	38
	550	NET mode operation command source	0, 1, 9999	1	9999	44
		selection
	551	PU mode operation command source	1, 2	1	2	44
		selection
Current average monitor	555	Current average time	0.1 to 1.0s	0.1s	1s	44
	557	Data output mask time	0 to 500/0 to 3600A*1	0.01/0.1A*1	0s	44
	556		0.0 to 20.0s	0.1s		44
		Current average value monitor signal			Rated inverter
		output reference current			current
	563	Energization time carrying-over times	0 to 65535	1	0	32
	564	Operating time carrying-over times	0 to 65535	1	0	32
	571	Holding time at a start	0.0 to 10.0s, 9999	0.1s	9999	29
PID control	575	Output interruption detection time	0 to 3600s, 9999	0.1s	1s	39
	576	Output interruption detection level	0 to 400Hz	0.01Hz	0Hz	39
	577	Output interruption release level	900 to 1100%	0.1%	1000%	39
	611	Acceleration time at a restart	0 to 3600s, 9999	0.1s	5/15s*1	33

*1 Differ according to capacities. (55K or less/75K or more)

		Features
Peripheral Devices		Why energy		savings?
	Standard		Specifications
Outline		Dimension		Drawings
Terminal Connection	Diagram		Terminal Specification		Explanation
	Operation		Panel
	Parameter		List
Explanations		of		Parameters
	Protective		Functions
		Options
		Instructions
		Motor
		Compatibility
		Warranty
		Inquiry

26