Mitsubishi Electronics FR-F700 instruction manual Explanation of the Operation Panel FR-DU07

Explanation of the Operation Panel (FR-DU07)

Operation mode indication

PU: Lit to indicate PU operation mode.

EXT: Lit to indicate external operation mode.

NET: Lit to indicate network operation mode.

Unit indication

·Hz: Lit to indicate frequency.

·A: Lit to indicate current.

·V: Lit to indicate voltage.

(Flicker when the set frequency monitor is displayed.)

Monitor(4-digit LED)

Shows the frequency, parameter number, etc.

Setting dial

(Setting dial: Mitsubishi inverter dial)

Used to change the frequency setting and parameter values.

Rotation direction indication

FWD: Lit during forward rotation

REV: Lit during reverse rotation

On: Forward/reverse operation

Flickering: When the frequency command is

not given even if the forward/reverse command is given.

Monitor indication

Lit to indicate monitoring mode.

No function

Operation command forward rotation

Operation command reverse rotation

Stop operation

Alarms can be reset

Used to set each setting.

If pressed during operation, monitor

	changes as below;
Mode		Running	Output	Output
		frequency	current	voltage
switchover
Used to change	* Energy saving monitor is displayed when the
each setting mode.
		energy saving monitor of Pr. 52 is set.

Operation mode switchover

Used to switch between the PU and external operation mode.

When using the external operation mode (operation using a separately connected frequency setting potentiometer and start signal), press this key to light up the EXT indication. (Change the Pr.79 value to use the combined mode.) PU: PU operation mode

EXT: External operation mode

*

19