VGA Input

Appendix B: Input Connection Compatiblity

Component-1 and Component-2 Inputs

These inputs are compatible with component video signals from standard DVD players and other equipment sending a standard NTSC component video signal (480i). These inputs may also be compatible with newer DVD players sending a progressive NTSC component video signal (480p).

This input will accomodate most computers capable of supporting a VGA monitor.

The only compatible display resolution is 640x480. The sync rate is 60 Hz. SVGA and XVGA resolutions are not supported.

Input Levels and Timing with Com- ponent Video

Y =1.0Vp-p (includes sync) 75-Ohms

Pr =700mVp-p,75-Ohms (can also receive signals from outputs labeled R-Y and Cr)

Pb =700mVp-p, 75-Ohms (can also receive

signals from outputs labeled B-Y and Cb)

Appendix

INP-DTV

This input is compatible with most standard DTV and satellite receivers with component video (YPbPr) outputs. Compatible DTV sig- nals are SDTV 480i/480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver speci cat ions bef or e con- necting.

This input is compatible with some DTV receivers using RGB with sync on green or with “separate H and V sync”. Com- patible DTV signals are SDTV 480i, 480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Industry standards for DTV RGB sig- nals systems, synchronization, timing, and signal strengths are not currently estab- lished. These inputs will not be compatible with all DTV receivers that offer RGB. If your DTV receiver offers both DTV compo- nent video signals and DTV RGB signals, Mitsubishi suggests you use the DTV com- ponent video signals. Please check the DTV receiver speci cat ions bef or e connect - ing.

Input Levels and Timing When

Used With Component Video

Signals

EIA - 770.3 Standard Levels and Timing

Y =1.0Vp-p (includes sync) 75-Ohms