Mitsubishi Electronics WS-55859 Appendix E Diamond Shield Installation, WS-55909, and, WS-73909

Appendix E: Diamond Shield Instructions

Appendix E: Diamond Shield™ Installation

Diamond Shield™ Installation for Models

The instructions below will lead you through the WS-65909Diamond Shield installation process. Included

in the Diamond Shield package are the following items:

For models WS-65909 and WS-73909 only.

(1) Diamond Shield™
(2) molding clips	2

1Carefully remove the Diamond Shield™ from the protective packaging. Wipe off any dust with a lint-free cloth. Do not use any cleaners on the anti-glare Diamond Shield™.

2Begin by inserting the shield, sliding it into the channels, starting at the bottom. Gently bow the Diamond Shield™ toward you and insert the top of the Diamond Shield™ into the top channel.

3Install the left and right molding clips by pressing them into the opening, starting at a corner. Do not force the clip. The clip will slide into place. This completes the Diamond Shield™ installation.

To remove the Diamond Shield™, reverse the order of the above process.

Diamond Shield™ for the model

WS-55909 comes installed by the fac- tory.

WS-55909, and, WS-73909

3

78