Mitsubishi Electronics WS-65909, WS-73909, WS-65869, WS-55859 Connecting a DVD Player, Satellite

Part II: Installation

WARNING: Do not display the same stationary images on the screen for more that 15% of your total TV viewing in one week. Examples of stationary images are

letterbox top/bottom bars from DVD or other video sources, side bars when showing standard TV pictures on widescreen TV’s, stock market reports, video game patterns, station logos, web sites, or stationary computer images. Such patterns can unevenly age the picture tubes causing permanent damage to the TV. Please see page 70 for a detailed explanation.

Connecting a DVD Player

TV back panel

	1
	2
	3
White	5
Red	4

DVD back panel

1				AUDIO OUT				AC IN
	Y	VIDEO		5.1 CH SURROUND	2CH	BITSTREAM/PCM	MITSUBISHI
							DVD PLAYER
2			White	CENTER			MODEL DD-5000
	CB			5		L	POWER SUPPLY	120V~ 60Hz
		S					POWER CONSUMPTION	20W
3				4
	CR		Red			R	DISTRIBUTED BY
							MITSUBISHI DIGITAL ELECTRONICS
							AMERICA, INC.
	VIDEO OUT			SUBWOOFER SURROUND FRONT		COAXIAL OPTICAL	9351 JERONIMO ROAD
							IRVINE, CA 92618

MADE IN JAPAN

Figure 1. Connecting the DVD player.

See Appendix B, page 73, for compo- nent video signal compatibility informa- tion.

For digital audio connections, see your DVD and A/V receiver Owner’s Guides.

DVD Player with Component Video

(Figure 1)

Connect the Component Video cables from Y/Cr/Cb or Y/Pr/Pb VIDEO OUT on the back of the DVD player to COM- PONENT-1 or COMPONENT-2 on the TV back panel, matching the correct con- nection:

1Y to Y

2Cr or Pr to Pr

3Cb or Pb to Pb

Connect a set of audio cables from AUDIO OUT on the back of the DVD player to COMPONENT AUDIO Input 1 or 2 on the TV back panel. The red cable 4 connects to the R (right) chan- nel, and the white cable 5 connects to the L (left) channel.

Connecting a DVD Player or S-

Connecting an S-Video VCR or Satellite Receiver

TV back panel

S-Video VCR or Satellite Receiver

(Figure 2)

1Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1, INPUT-2, INPUT-3, or INPUT-4 on the TV back panel.

Video VCR or

	1
	White
2	Red

Any S-Video Device

	AUDIO OUT	AUDIO IN	VIDEO OUT
White	L	L	(Y/C)	1
2	1	2
Red	R	R

Figure 2. Connecting an S-Video Device.

2

Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1, INPUT-2, INPUT-3, or INPUT-4 on the TV back panel. The red cable connects to the R (right) chan- nel and the white cable connects to the L (left) channel. If your device

is mono (non-stereo), connect only the white (left) cable.

Satellite

21