Mitsubishi Electronics WS-55859, WS-73909, WS-65909, WS-65869, WS-55909 Operation of PIP and POP

Part IV: Operation

Remote Control Functions: Operation of PIP and POP

MAIN

PICTURE

Side-by-Side

Changing PIP/POP Device

Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection Menu will be displayed.

Changing PIP/Side-by-Side Chan- nels

Press PIP CH to scroll up and down through memorized channels on Ant-A and Ant-B.

	POP 1
MAIN
	POP 2
PICTURE
	POP 3

POP 1 POP 2 POP 3

MAIN	POP 4	POP 5	POP 6
PICTURE
	POP 7	POP 8	POP 9

Ant-A 002 KCBS	PIP A 017
Standard
Stereo SAP
TV-PG DLSV
SQV1

PIP/POP Combinations

Exchanging Program Images

Press ENTER/EXCH to exchange the main pic- ture and the PIP/POP picture.

Moving PIP Image

If no menus are on the screen, press ADJUST , , , or to move the PIP display anywhere on the main screen.

Automatic POP Switching

When automatic POP switching is active, the TV will cycle through memorized channels or strobe pictures from other A/V components in the POP display.

Selecting POP “Live” Image

Press ADJUST , , , or then press ENTER to select a different POP “live” image (automatic POP switching must be paused).

Freeze the PIP and Side-By-Side Picture, Pause POP Switching

Press PAUSE to freeze the PIP and side-by-side images or pause POP switching. Press PAUSE again to return to a “live” image or restart POP switching.

PIP/POP Audio Signal

For PIP/POP audio connection illustration, see Back Panel Functions - 2 , page 13. Volume for the PIP AUDIO OUTPUT is controlled by the ampli er or wirel ess headphones.

Operation of PIP and POP

*Same channel for Ant-A and Ant-B or same input for other inputs not available for side-by-side.	63
**480p and 1080i signals are not compatible with PIP/POP.