36 Communications Gateway User Guide
X
Home Print E xit
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary License
Configuring TCP/IP in Windows 2000 or XP
The following instructions are for Windows 2000 or XP. For Windows 95, 98, or Me, see
“Configuring TCP/IP in Windows 95,98, or Me” on page 33. For a Macintosh or UNIX
system, refer to your user guide.
1On the Windows Desktop, click Start.
2Select Settings and then Control Panel from the pop-up menus.
3On the Control Panel window, double-click the Network and Dial-up Connections
icon.
4On the Network and Dial-up Connections windo w, click Local Area Connection
number. The value of number varies from system to system. The Local Area
Connection number Status window is displayed.