Motorola Communications Gateway 10 , 11 , 12

48 Communications Gateway User Guide

Replacing the Battery, continued

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Home Print E xit

10 On a slight angle, gently slide the top-ri ght corner of the battery under the battery

hook as shown at left.

While you rotate the battery into position, to avoid pinching the wires between the

battery and the base, be sure the battery wires are not under the battery. Pinching

the wires between the battery and the base:

■ May damage the wires

■ Will cause the battery to seat incorrectly

11 Rotate the battery into position under the battery snaps as shown by the arrow at left.

When the battery is fully seated, the snaps engage the battery base.

12 Carefully replace the battery compartment cover. Do not force the cover closed. If

the battery compartment cover does not close easily, check that:

■ The power cord is positioned correctly in its opening

■ The battery is correctly seated (you perfor med steps 14 to 15 correctly)

Then rotate the battery

under the snaps

First, slide the battery

under the hook