Motorola Communications Gateway manual Immediately plug the power cord into the electrical outlet

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Cabling and Startup for a Single User, continued

17Immediately plug the power cord into the electrical outlet.

This turns your Motorola Communications Gateway on. You do not need to unplug it when not in use.

18Check that the lights on the Communications Gateway cycle through this sequence:

■Power flashes during the self-test and changes to solid green when the self-test is successfully complete.

■Online flashes while the Communications Gateway downloads its configuration data and changes to solid green when the download is complete.

Home	Print	X	18	Communications Gateway User Guide
		Exit